REQUIRED
For hacking BroadBand you will require
*Angry ip scanner
* Asterix Key 7.11
* A Computer
*An internet connection
Download AngryIPScan and Asterix key
http://rapidshare.com/files/251859527/SC.rar

http://www.megaupload.com/?d=TZEI7HFM

HOW TO
1. Go to http://www.whatismyip.com/
2. Let’s assume your ip is 59.94.133.57 so now go to Angry IP scanner and in IP range enter 59.94.133.0 to 59.94.133.255 now go to options->Select Ports… and in “ports”
enter “80″(without the inverted commas), click on ok.
3. Click on “Start”
4. Now when the scan is over……..right click on the green ip’s and select IP->clipboard
5. Goto internet explorer and press Ctrl+V in the adress bar
6. Hit enter
7. Enter admin as the username and admin as the password
8. Search for the wan settings page somewhere.(Most Password r in WAN PAGE)
9. When you have arrived at that page open asterix key and click on Recover
10.Now you have the username (from the wan settings page) and the password (from Asterix key).
And also guys i am giveing a extra tool in the above link also and it help to go inside a pc or laptop through internet whose ip is open. (+) this symbol means that u can enter to his pc…..

sometimes it may not work coz
1) New Routers ke configuration pages dont have saved passwords
2) Only noobs keep the admin-admin stuff
3) PORT BINDING

but still you may try coz who knows if you are lucky??

A Simple Tweak (XP Pro only) which will increase your Broadband Speed.

Make sure you Log on as Administrator, not as a user with Administrator privileges.

Follow the steps as given below-

1) Click on Start Button.

2) Select Run From Start Menu.

3) Type gpedit.msc

4) Expand the [Administrative Templates] branch.

5) Then Expand the [Network] branch.

6) Highlight(Select by Single Click) [QoS Packet Scheduler]

7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel)

8) Check(Select By Single Click on it) [Enabled]

9) Change [Bandwidth limit %] to 0 %

10) Click [OK] Button.

11) Restart Your PC.

12) Now Check Your Broadband Speed.

I need to connect two buildings which are 100 metres apart. Both buildings are using wireless networks and one has an ADSL modem. I want to ensure both buildings can access the LAN to use shared resources and the Internet through the single ADSL connection. -- Charles
Before getting started, look at the total number of users you will have on one connection and compare that against the speed of your DSL. Depending on your level of service, you may want to increase the speed if you can (this will depend on how far your location is from the central office providing you with DSL). See if you can get broadband service from the cable company. More cable companies are beginning to provide this type of service to companies. You may be able to get better Internet performance for the same money or just a little bit more than you are currently paying.
Given the short distance between the buildings, see if you can get a dry copper pair between them. This needs to be a line with no "conditioning" voltage or dial tone on it. If you can get this, look at companies such as Blackbox, which offer Ethernet and network extenders. They can use a copper pair to create what amounts to a private DSL connection between both ends to give you a pretty decent connection speed - and without the monthly cost of a second broadband connection for the second building (while putting in a second broadband connection is an option, it will also complicate the ability to share files and do other tasks normally associated with a LAN).
If getting a dry pair for a network connection or a second broadband connection isn't an option, consider using a wireless link between the buildings. You will need to see if there is a direct line of sight between buildings, preferably with no obstructions such as trees. Trees (or even tall bushes) can attenuate the signal between access points/bridges to the point where the wireless link could be intermittent.
If you do have a clear view between buildings, you will want to look at some type of external antenna to use for the inter-building link. You will need a directional antenna to concentrate the signal to where you want it to be, so you don't become an ISP to the neighbours. One place to look for antennas is www.hyperlinktech.com. They have a good assortment to choose from, as well as folks who can assist with choosing the best antenna for your application. Once you have the antenna, you will need to look at using a bridge to connect the two locations. Most access points don't have bridging built in, so look at dedicated devices, which typically will cost you a bit more than your average access point. An alternative is to go with a Linksys WRT54-GL access point and open-source firmware such as DD-WRT, which includes a Wireless Distribution System function.
As with any wireless connection, I can't stress strongly enough the need to use as strong encryption as possible, to keep somebody from intercepting your wireless traffic. Since you already have wireless running in both buildings, you will need to select a different channel for your bridge connection. For example, if you are using channel 6 for your in-building wireless, you could use either channel 1 or 11 for the bridge connection.

I usually get 2-4 mails a week asking about how to increase Airtel Broadband Internet Speed. As I am using Airtel Broadband internet connection so today I am going to tell you that how you can increase your Internet speed from 64 Kbps to 256 Kbps without any software.

I do not know whether this trick is legal or not but I guarantee you that Airtel will never know about this.

So lets start :

Requirements :

1) An Airtel broadband connection.
2) Any Airtel phone number with high broadband speed : Yes, you need a phone number of Airtel with high broadband speed like 256 kbps. Airtel connection is so common that any of your friend or neighbour might be using it. Just ask for their phone number and save it. As an example, I am assuming a number 1234567

First Download this ETHERNET Ip Sniffer called ETHERDETECT

Use the tool to Scan Ip's in your network

Keep Scanning till you get some 200 Ip's ..

Then just change the last 3 digits of your IP Address with the IP's you get In that scanner !!
NOTE:Please save your Ip address somewhere so as to get back to your original ip !

It will say "Ip conflict" error,keep trying with other Ip's untill you succeed.

Sometimes when you will change your Ip you will get same speed ...in that case ..try another ip


..:~Download Link~:..
CODE
http://rapidshare.com/files/46070425/EtherDetect_setup.exe

..:~SERIAL~:..
CODE
YW38X6HKWYT4CTK

also see:

Hacking Internet Cafe